Kazem
From KratosWiki
(Difference between revisions)
(→Solution strategy) |
(→Boundary conditions) |
||
Line 60: | Line 60: | ||
* Wall boundary condition: | * Wall boundary condition: | ||
** Slip boundary condition: If velocity is not assigned to a boundary it is automatically considered as Slip. | ** Slip boundary condition: If velocity is not assigned to a boundary it is automatically considered as Slip. | ||
− | |||
− | |||
==== Initial conditions ==== | ==== Initial conditions ==== |
Revision as of 15:11, 24 July 2013
Contents |
Multifluid module
Introduction
Examples showing the class of problems that the code can solve (2-4 examples)
About this module
- Solves the Navier-Stokes equations for a multi-fluid system considering large jumps in density .
- Tractions are considered continuous at the interface and therefore no jump in viscosity is considered.
- Level Set method is used to determine the interface position at each step.
- Local pressure enrichmnet is considered at the cutted element to capture the discontinuous pressure gradient.
Technical descriptions
Fluid types
- Incompressible fluid
Constitutive laws
- Newtonian
Kinematic approaches
- Eulerian
- With free surface (level set)
Solution strategy
- Monolithic
- Residual based Newton Raphson strategy is exploited to treat nonlinearities.
Elements
3D: Linear tetrahedral elements (It works just in 3D)
- Element name: DPGVMS( Discontinuous Pressure Gradiant with Variational Multi Scale technique)
Boundary conditions
- Velocity boundary condition: Inlet of water
- Pressure boundary condition: Pressure can be imposed strongly or weakly...
- Wall boundary condition:
- Slip boundary condition: If velocity is not assigned to a boundary it is automatically considered as Slip.
Initial conditions
- Zero of the Level set has to be assigned as the initial condition by assigning + and - Distance flag.
Turbulence models
All turbulance models inside KRATOS can be used:
- Smagorinsky-Lily
- Spalart-Allmaras
HPC
The code can be run in shared or distributed memory:
- OpenMP:
- MPI: