User:Ryzhakov

From KratosWiki
(Difference between revisions)
Jump to: navigation, search
(Selected conference Papers:)
(Scholarships/awards:)
Line 156: Line 156:
  
 
== Scholarships/awards: ==
 
== Scholarships/awards: ==
 +
2017 - Juan Carlos Simó young researcher award by Spanish Society for Numerical Methods in Engineering (SEMNI)
 +
 
2015 - Europa Investigación grant by the Spanish Ministry of Education
 
2015 - Europa Investigación grant by the Spanish Ministry of Education
  
2014 - Spanish Ministry of Education grant (former "Juan de la Cierva grant") for post-doctoral researchers
+
2013 - Juan de la Cierva (FPD) post-doctoral grant by Spanish Ministry of Economy and Competitiveness
  
 
2006 - Marie Curie Scholarship for pursuing doctoral studies
 
2006 - Marie Curie Scholarship for pursuing doctoral studies
Line 169: Line 171:
  
 
1999 - Award at the conference of Young Scientists for the work "Unusual defects on the surface of single crystalline SiC", Moscow
 
1999 - Award at the conference of Young Scientists for the work "Unusual defects on the surface of single crystalline SiC", Moscow
 
  
 
== Additional trainings: ==
 
== Additional trainings: ==

Revision as of 09:12, 30 January 2017

Contents

Personal information:

Pavel Borisovich Ryzhakov

Born in 1982 in Saint-Petersburg, Russia

Researcher at the International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain

Associate professor at the Politechnic University of Catalonia (UPC) and TecnoCampus Mataro

Accredited by ANECA (Agencia Nacional de Evaluación de la Calidad y Acreditación) as Profesor Contratado Doctor (08/05/2016)

Accredited by AQU (Agència per a la Qualitat del Sistema Universitari de Catalunya): "Acreditació de recerca (professorat agregat)" (07/10/2016)

e-mail: pryzhakov@cimne.upc.edu

web-page: http://www.cimne.com/pavel

Teaching:

Structural analysis III (UPC) - MSc course

Modelling and simulation (TecnoCampus Mataro) - undergrad level course

Engineering materials (TecnoCampus Mataro) - undergrad level course

Supervised 1 PhD thesis and 4 MSc theses

Education:

2006-2010 - PhD, Universidad Politecnica de Catalunya, Barcelona, Spain

2004-2006 - Master of Science with Honors in Computational Mechanics, TU Munich, Germany.

1999-2003 - Bachelor of Science in Mechanical Engineering, University of Karlsruhe, Germany.

1999 - graduated from the School of Physics and Technology in Saint-Petersburg at Russian Academy of Science


Journal Publications:

18. P. Ryzhakov, J. Marti, S. Idelsohn, E. Oñate. Fast fluid-structure interaction simulations using a displacement-based finite element model equipped with an explicit streamline integration prediction, Computer Methods in Applied Mechanics and Engineering, Vol. 315, pp. 1080–1097, DOI: 10.1016/j.cma.2016.12.003.

17. P. Ryzhakov, J. García, E. Oñate. Lagrangian finite element model for the 3D simulation of glass forming processes, Computers and Structures 177 (2016) 126–140.

16. P. Ryzhakov. An axisymmetric PFEM formulation for bottle forming simulation, Computational Particle Mechanics, accepted for publication 02/05/2016, DOI: 10.1007/s40571-016-0114-7

15. P. Ryzhakov, A. Jarauta, M. Secanell, J.Pons-Prats. On the application of the PFEM to droplet dynamics modeling in fuel cells, Journal of Computational Particle Mechanics (CPM), accepted for publication 08/04/2016, DOI 10.1007/s40571-016-0112-9

14. A. Jarauta, P. Ryzhakov, M. Secanell, P. Waghmare, J.Pons-Prats. Numerical study of droplet dynamics in a polymer electrolyte fuel cell gas channel using an embedded Eulerian-Lagrangian approach, Journal of Power Sources, Vol. 323 (2016) pp. 201-212


13. P. Ryzhakov and A. Jarauta. An embedded approach for immiscible multi-fluid problems, Int. Jour. for Num. Methods in Fluids (IJNMF), 21/10/2015, DOI 10.1002/fld.4190, Volume 81, Issue 6, pp. 357–376 (impact factor: 1.447)

12. P. Ryzhakov. A modified fractional step method for fluid-structure interaction problems, accepted in Revista Intern. Met. Num. Ing. (RIMNI), 17/09/2015, DOI 10.106/j.rimni.2015.09.002

11. A. Jarauta, M. Secanell, J. Pons-Prats, P. Ryzhakov, S. Idelsohn, E. Oñate. A semi-analytical model for droplet dynamics on the GDL surface of a PEM fuel cell cathode, Int. J. Hydrogen Eneergy, 40 (15), pp. 5375-5383, 2015

10. P. Ryzhakov, J. Cotela, R. Rossi, E. Oñate. A two-step monolithic method for efficient simulation of incompressible flows, Int. Jour, for Num. Methds. in Fluids, Vol. 74, Issue 12 (2014) pp. 919–934.

9. E. Oñate, J. Marti, P. Ryzhakov, R. Rossi, S. Idelsohn. Analysis of the melting, burning and flame spread of polymers with the Particle Finite Element Method. Computer Assisted Methods in Engineering and Science. 20 - 3, pp. 165 - 184. 2013.

8. P. Ryzhakov, R. Rossi, A. Viña, E. Oñate. Modelling and simulation of the sea-landing of aerial vehicles using the Particle Finite Element Method. Int. Journal of Ocean Engineering, Vol. 66 (2013), pp. 92–100

7. J. Marti, P. Ryzhakov, S. Idelsohn, E. Oñate. Combined Eulerian-PFEM approach for analysis of polymers in fire situations, Int. Jour. for Num. Methds. in Eng. (IJNME) Vol. 90-9, pp. 782-801, 2012

6. P. Ryzhakov, R. Rossi, E. Oñate, S. Idelsohn. Improving mass conservation in simulation of incompressible flows, Int. Jour. for Num.Methds. in Eng. (IJNME) Vol. 90-12, pp. 1435-1451

5. P. Ryzhakov, R. Rossi, E. Oñate. An algorithm for the simulation of thermally coupled low speed flow problems, Int. Jour. Num. Meth. in Fluids (IJNMF) Vol. 70-1, pp. 1-19, 2012.

4. P.B. Ryzhakov, R. Rossi, S. Idelsohn, E.Oñate. A monolithic Lagrangian approach for fluid-structure interaction problems, Journal of Computational Mechanics, Vol. 46-6, pp. 883-899, 2010

3. R. Rossi, P. B. Ryzhakov, E. Oñate. A monolithic FE formulation for the analysis of membranes in fluids, International Journal of Spatial Structures, Vol. 24-4, pp. 205-210, 2009

Books and book chapters:

2. Lagrangian finite element methods for coupled problems in fluid mechanics, authors: P. Ryzhakov, E. Oñate, R. Rossi, S. Idelsogn. Monograph. M121, CIMNE, 2010, ISBN 978-84-96736-97-9

1. Advances in the Particle Finite Element method (PFEM) for solving coupled problems in engineering, authors: E. Oñate, S.R. Idelsohn, M.A. Celigueta, R. Rossi, J. Marti, J.M. Carbonell, Pavel Ryzhakov and B. Suárez. A E. Oñate and R. Owen (eds.), Particle-Based Methods, Computational Methods in Applied Sciences, Vol. 25, pp 1-49, Springer, 2011.

Selected conference Papers:

26. Numerical study of roughness and contact angle effects on water transport in a gas channel, A. Jarauta, T. Chan, A. Weber, P. Ryzhakov, J. Pons, M. Secanell, 231 ECS (Electro Chemical Society) Meeting, New Orleans, USA, May 28-June 2, 2016.

25. Two-phase transport in microchannels under different injection conditions, authors: P.B. Ryzhakov, A. Jarauta, J. Pons-Prats and M. Secanell, EFMC11 (11th European Fluid Mechanics congress), Seville, 11-16 September, 2016

24. Numerical model of droplet dynamics using an embedded PFEM-Eulerian formulation, A. Jarauta, P.B. Ryzhakov, J. Pons-Prats and M. Secanel, Particle Methods 2015, Barcelona, Spain, 28-30 September 2015

23. Modelling and simulation of counter blow and final blow processes in bottle manufacturing, authors: P. Ryzhakov, J. García-Espinosa, E. Oñate. Particle Methods 2015, Barcelona, Spain, 28-30 September 2015

22. An embedded approach for immiscible multi-fluid problems, authors: P. Ryzhakov and A. Jarauta, WCM2015, San Servolo, Venice, Italy, 18-20 May 2015

21. Numerical model of droplet dynamics using an embedded formulation, authors: A. Jarauta, P.B. Ryzhakov, J. Pons-Prats and M. Secanell, WCM2015, San Servolo, Venice, Italy, 18-20 May 2015

20. Embedded approaches: towards the virtual wind tunnel, R. Rossi; A. Larese, P. Dadvand, M. Davari, P. Ryzhakov.CMN 2015, Lisboa, Portugal, 29/06-02/07, 2015.

19. Numerical modelling of droplet dynamics in PEMFC cathode channels, authors: A. Jarauta, P.B. Ryzhakov, J. Pons-Prats and M. Secanell, 12th Symposium for Fuel Cell and Battery Modeling and Experimental Validation, Freiburg (Germany), 26-27 Mach 2015

18. Numerical modelling of droplet dynamics using an embedded formulation, A. Jarauta, P.B. Ryzhakov, J. Pons-Prats and M. Secanell, VI International Conference on Coupled Problems in Science and Engineering, San Servolo, Venice (Italy), 18-20 May 2015.

17. Numerical model of droplet dynamics using an embedded PFEM-Eulerian formulation, A. Jarauta, P.B. Ryzhakov, J. Pons-Prats and M. Secanell: IV Conference on Particle-Based Methods, Barcelona (Spain).


16. Numerical model of droplet dynamics on the GDL surface of a PEM fuel cell cathode, A. Jarauta, P.B. Ryzhakov, J. Pons-Prats and M. Secanell, 11th World Congress on Computational Mechanics 2014, 20-24/07/2014, Barcelona

15. How to speed-up an incompressible monolithic solver, authors: P. Ryzhakov, J. Cotela, R. Rossi, E. Oñate, CMN 2013, Bilbao, Spain, June 25-28, 2013

14. Analysis of the melting, burning and flame spread of polymers with the Particle Finite Element Method, authors: E. Oñate, J. Marti, P. Ryzhakov, R. Rossi, S. Idelsohn, Computer Assisted Methods in Engineering and Science, Vol. 20/3, pp. 165-184, 2013

13. Efficient tools and techniques for high-performance partitioned analysis of complex coupled systems, authors: Rossi, R.; Ryzhakov, P.; Cotela, J.; Dadvand, P.; Idelsohn, S.R.; Oñate, E., ECOMMAS 2012, September 10-14, Vienna, Austria

12. Advances in the Particle Finite Element Method for FSI: a modified fractional step approach, authors: P. B. Ryzhakov, R. Rossi, E. Oñate, full paper, PARTICLES-2011, Barcelona, Spain, Conference proceedings, 2011

11. A modified fractional step approach: P. Ryzhakov, E. Oñate, R. Rossi, CMM 2011, 09-12/05/2011 Warsaw, Poland, Conference proceedings, pp. 437-438.

10. Advances in the Particle Finite Element Method (PFEM) for Fluid-Structure Interaction, authors: P. B. Ryzhakov, R. Rossi, E. Oñate extended abstract, PARTICLES-2009, Barcelona, Spain, Conference proceedings, pp. 250-254, 2009

9. An algorithm for polymer melting simulation, P. B. Ryzhakov, R. Rossi, E. Oñate, conference proceedings METNUM-2009, Barcelona, Spain, 29/06/2009-02/08/2009

8. Strongly coupled approach for the treatment of the fluid-structure interaction problems involving highly deformable solids and shells, R. Rossi, P. Ryzhakov, E.Oñate, IASS­IACM 2008: “Spanning Nano to Mega” 28­31 May 2008, Cornell University, Ithaca, NY, USA, pp-1 -4

7. Quasi-incompressible updated lagrangian fluid and monolithic formulation for the the fluid-structure interaction problems involving highly deformable solids, Conference proceedings, WCCM8/ECCOMAS 2008, Venice Italy, 30/06/2008-04/07/2008, Pavel B. Ryzhakov, R. Rossi, S. Idelsohn and E. Oñate

6. Monolithic approach for the solution of the FSI problems using updated lagrangian formulation of the fluid domain, conference proceedings, GACM'07, Munich, Germany, 10-12/10/2007, P. Ryzhakov, R. Rossi, S.Idelsohn, E. Oñate

5. A Monolithic FE Formulation for the Analysis of Membranes in Fluids, conference proceedings, Structural Membranes 2007, Barcelona, Spain, 17-19/09/2007. Authors: P. Ryzhakov, R. Rossi, S.Idelsohn, E. Oñate

4. Sea-landing studies of the Intermediate eXperimental Vehicle IXV using the Particle Finite Element Method (PFEM), P. Ryzhakov, R. Rossi, E. Oñate, Technical report, CIMNE, March 2009.

3. Updated lagrangian formulation of the quasi-incompressible fluid element,conference proceedings, ECCOMMAS 2007 on Coupled Problems, Ibiza, Spain, 23-26/05/2007, Authors: P. Ryzhakov, R. Rossi, S.Idelsohn, E. Oñate

2. On the FSI in combustion chambers, conference proceedings, ECCOMMAS 2007 on Coupled Problems, Ibiza, Spain, 23-26/05/2007, P. Ryzhakov, M. Porta, R. Rossi, T. Shoenfeld

1. On the application of adaptive mesh refinement to the Particle Finite Element Method, conference proceedings (full paper) First south-east european conference in Computational Mechanics, SEECCM06, Authors: P. Ryzhakov and R. Rossi

Projects with industry:

COMETAD: Desarrollo de técnicas computacionales y experimentales para el análisis y el diseño de polímeros retardantes al fuego: 2015-2018

ULITES: Ultra-lightweight structures with integrated photovoltaic solar cells: design, analysis, testing and application to an emergency shelter prototype, 2013-2015 present

Numerical analysis of a FUEL SLOSHING TANK (CN-11-024) in cooperation with European Space Agency (ESA), 2011-2012

Balanced European Conservation Approach – ICT services for resource saving in social housing, 2011-2013

“Sea-landing studies of the intermediate eXperimental Vehicle IXV using the Particle Finite Element Method” in cooperation with CIMSA Ingeneria de Sistemas S.A. , 2007-2008

FLUISTCOM: Fluid-structure interaction for combustion chambers, in cooperation with Siemens AG and DLR, 2006-2008

T-SIMULAS: Desarrollo de nuevas TEcnologías de SIMULación de procesos de fabricación para inyección de Aluminio SemiSólido

NICOMP: Computational research to support the development of swimming and hovering underwater unmanned vehicles (UUV) by NRL

Theses:

PhD thesis: "Lagrangian FE methods for coupled problems in fluid mechanics"

MSc thesis: "Error estimation and adaptivity in fluid mechanics"

BSc thesis: "Design and validation of an experimental set-up for investigation of cavitation erosion"

Scholarships/awards:

2017 - Juan Carlos Simó young researcher award by Spanish Society for Numerical Methods in Engineering (SEMNI)

2015 - Europa Investigación grant by the Spanish Ministry of Education

2013 - Juan de la Cierva (FPD) post-doctoral grant by Spanish Ministry of Economy and Competitiveness

2006 - Marie Curie Scholarship for pursuing doctoral studies

2004 - Selected for Elite Student Network of Bavaria, Germany

2003 - Youth and Knowledge Scholarship award (for pursuing MSc studies)

1999 - Carl von Siemens Scholarship award (for pursuing BSc studies)

1999 - Award at the conference of Young Scientists for the work "Unusual defects on the surface of single crystalline SiC", Moscow

Additional trainings:

Internship at CERFACS, Toulouse, 2006

Industrial internships (Siemens AG, Germany, Russia) (6 months)

Summer school "Computational Science", Sud Tirol, 2005 (2 weeks)

Business Training, Erlangen, Germany, 2003

Memberships and Organizational activities:

Member of the Editorial Board of the Journal for Mechanical Engineering Research

Member of the Spanish Society for Numerical Methods in Engineering (SEMNI)

Member of Bavarian Graduate School of Computational Engineering (BGCE) Elitenetzwerk Bayern, Germany

Peer reviewer of the Computer Methods in Applied Mechanical Engineering Journal (CMAME)

Chairman of the International Student Association SAID of the the Mechanical Engineering Faculty, University of Karlsruhe, International Department (2002-2003)

Professional Interests:

CFD, multi-physics, fluid-structure interaction, compressible flows

Personal Interests:

Literature of modernist writers (Marcel Proust, James Joyce), literary translation, classical music, electric guitar

Hobbies:

Gym, swimming

Personal tools
Categories