GeneralTemplate

From KratosWiki
(Difference between revisions)
Jump to: navigation, search
(Computational Structural Mechanics module (CSMM))
 
Line 105: Line 105:
  
  
[[Category:Theory Manual]]
 
  
 
== <span style="color:#FF0000"> Computational Structural Mechanics module (CSMM) </span> ==
 
== <span style="color:#FF0000"> Computational Structural Mechanics module (CSMM) </span> ==
Line 245: Line 244:
  
  
[[Category:Theory Manual]]
 
  
 
== <span style="color:#FF0000"> Convection Diffusion module (CDM)</span>==
 
== <span style="color:#FF0000"> Convection Diffusion module (CDM)</span>==

Latest revision as of 17:05, 30 July 2013

Contents

Computational Fluid Dynamics module (CFDM)

CFDM Introduction

Examples showing the class of problems that the code can solve (2-4 examples)

Shape.jpg Brief description of wat the model means, eventually insert link to the benchmark section...or whatever...

ADVERTISMENT STYLE no numerical details!!!

Shape.jpg Brief description of what the model means
Shape.jpg Brief description of what the model means
Shape.jpg Brief description of what the model means



Description of the underlying theory and schematic list of the problems this application can solve.

In this application the Navier Stokes equations are solved bla bla..

CFDM Structure

CFDM Fluid types

  • Incompressible fluid

aaa

  • Compressible fluid

Constitutive laws

  • Newtonian
  • No-Newtonian
    • Bingham plastics
    • Variable yield model

CFDM Kinematical approaches

  • Eulerian
    • With free surface (level set)
    • Without free surface
  • Lagrangian PFEM (implicitly with free surface)

CFDM Solution strategy

  • Fractional step
  • Monolithic

Different solvers are availables (LINK TO SOLVER SECTION!!!!)


In both cases a Newton Raphson residual based strategy is used for linearizing the problem.

CFDM Elements

Linear triangular elements in 2D and linear tetrahedra elements in 3D.

Stabilization techniques availables:

  • ASGS
  • OSS

CFDM Boundary conditions

  • Velocity boundary condition: Inlet of water
  • Pressure boundary condition: Pressure can be imposed strongly or weakly...
  • Wall boundary condition:
    • Slip/no slip boundary condition
    • Wall law
  • Flag variable?????

CFDM Initial conditions

Initial condition both in velocity and pressure can be set.

CFDM Turbulence models

The user can chose wether to use or not a turbulence model. Those available in kratos are:

  • Smagorinsky-Lily
  • Spalart-Allmaras

CFDM HPC

The code can be run in shared or distributed memory:

  • OpenMP:
  • MPI:

CFDM Problem parameters

CFDM Others relevand aspects

CFDM Benchmarking

CFDM Tutorials

CFDM Contact people

CFDM Akcnowledgements

Computational Structural Mechanics module (CSMM)

CSMM Introduction

Examples showing the class of problems that the code can solve (2-4 examples)

Description of the underlying theory and schematic list of the problems this application can solve.


The Computational Structural Mechanics module (CSM) is....

CSMM Application Structure

CSMM Analysis Type

The available solutions strategies are:

  • Static
  • Dynamic
  • Relaxed dynamic

With this module you can solve both linear and non linear problems. In case of non linear problems several methods are available:

  • Newton-Raphson
  • Newton Raphson with line search
  • Arch lenght

Different solvers are availables (LINK TO SOLVER SECTION!!!!)


CSMM Elements

  • Frame Elements:
    • Euler-Bernoulli beam short explanation
    • Crisfield truss short explanation
  • 2D elements
    • Linear triangular element:
  • Shell elements:
    • Isotropic shell: (change the name with the usual one!!!!)
    • Ansotropic shell: (change the name with the usual one!!!!)
    • EBST shell: (change the name with the usual one!!!!)
  • Membrane element:
  • Solid elements:
    • Linear tetrahedral element:
Dimension Element Type Kratos name Geometry Nonlinearity Material Type
1D Frame LinearBeamElement Line Isotropic
1D Truss CrisfieldTrussElement Line Large Displacement Isotropic
2D Solid TotalLagrangian 2D Geometries Large Displacement Isotropic
3D Solid TotalLagrangian 3D Geometries Large Displacement Isotropic
Shell ShellIsotropic 3D Triangle Large Displacement Isotropic
Shell ShellAnisotropic 3D Triangle Large Displacement Orthotropic

CSMM Boundary Conditions

Boundary conditions can be set fixing displacements and rotations degrees of freedom.

CSMM Loads

  • Self weight
  • Punctual force
  • Moment
  • Face pressure (sign convenction!!!!)
  • Distributed load

CSMM Constitutive laws

The following constitutive laws are available:

  • Linear elastic:
  • ...

CSMM HPC

The code can be run in shared or distributed memory:

  • OpenMP:
  • MPI:

CSMM Problem parameters

...

CSMM Others relevand aspects

...

CSMM Benchmarking

Here validation and verification examples should be inserted

CSMM Tutorials

CSMM Contact people

CSMM Akcnowledgements

Convection Diffusion module (CDM)

CDM Introduction

The numerical solution of convection-diffusion transport problems arises in many important applications in science and engineering. These problems occur in many applications such as in the transport of air and ground water pollutants, oil reservoir flow, in the modeling of semiconductors, and so forth. This paper describes the Convection Diffusion Applications for solving this equation.

Theory

Under the assumption of incompressibility, the governing equations are given by

Problem description


  \rho C \frac{\partial T}{\partial t} + \rho C v \cdot \nabla T + \nabla
  \cdot q = 0 
(1)



  q = -\kappa \nabla \cdot T 
(2)

In the context of mass difussion within a fluid, (1) is is the mass conservation equation and (2) is a contitutive law proposed by Fourier. The notation is standard: ρ is the density, C the heat capacity, κ the thermal conductivity, T is the temperature, v is the velocity field and q is the diffusive flux per unit fluid density.


Remark: systen can be decoupled since we can plug (2) into (1) and solve the scalar equation


  \rho C \frac{\partial T}{\partial t} + \rho Cv \cdot \nabla T -
  \nabla \cdot (\kappa \nabla \cdot T) = 0 
(3)


Problem statement

Let us consider the transport by convection and diffusion in an open set Ω \subset \Re^d(d=2 or 3) \ with piecewise smooth boundary Γ, such that \Gamma = \Gamma_d \cup \Gamma_N. The unit outward normal vector to Γ is denoted n. The convection-diffusion initial-boundary value problem can be stated as follows: given a divergence-free velocity field a, the diffusion tensor κ and adequate initial and boundary conditions, find T : \bar{\Omega} \times \left[ 0, T \left] \rightarrow \Re \right. \right. such that


\rho C \frac{\partial T}{\partial t} + \rho Cv \cdot \nabla T -
   \nabla \cdot (\kappa \nabla T) = 0 in \Omega \times (0, T) 
(4)


T(x,0) = T0(x)onΩ


T = T_D on \Gamma_D \times (0, T)


k (\nabla T) \cdot n = q on \Gamma_N \times (0, T)


Space discretization method Multiplying Eq.(4) by a test function W and intehrating on the whole domain Ω the equation reads


\int_\Omega \rho C \frac{\partial T}{\partial t} W d V + \int_\Omega \rho Cv \cdot
   \nabla T W d V = \int_\Omega (\nabla \cdot (k \nabla T)) W d V 
(5)

Integratin by parts the right term of Eq.(5) leads to

 \int_\Omega \rho C \frac{\partial T}{\partial t} W d V + \int_\Omega v \cdot \nabla T W d
   V = - \int_\Omega k \nabla T \cdot \nabla W d V (6)

Finite element discretization

The temperature is discretized in the standard finite element method manner as 
 T = \sum N_i T_i 
(7) where Ni are the nodal shape functions. Substituting the finite element approximation (7) into the variational equation () and choosing a Galerling formulation (Wi = Ni) leads to the following equation:

 \rho C M \frac{\partial T}{\partial t} + \rho C S T 
 = - \kappa L T (7)

Time discretization method Consider a first-order BDF (that is, the Euler implicit scheme)



\frac{\partial T}{\partial t}=\frac{(T^{n + 1} - T^n)}{\Delta t}

or a second-order BDF



\frac{\partial T}{\partial t}= \frac{1}{2} \frac{(3 \times T^{n + 1} - 4 \times T^n + T^{n-1})}{\Delta t}

CDM Structure

Analysis type

The available solution strategy is:

   Dynamic

With this module you can solve both linear and non linear problems.

CDM Kinematical approaches

Eulerian and Lagrangian approach are available in order to solve the equation.

CDM Solution strategies

CDM Elements

Linear triangular elements in 2D and linear tetrahedra elements in 3D. Both elements are stabilized with OSS.

ConvDiff2D

ConvDiff3D

CDM Boundary conditions

Dirichlet boundary condition:


T = T_D on \Gamma_D \times (0, T)

Neumann boundary conditions: 
k (\nabla T) \cdot n = q on \Gamma_N \times (0, T)

CDM Initial conditions

Initial condition in temperature can be set.

CDM HPC

The code can be run in shared or distributed memory:

  • OpenMP:
  • MPI:

CDM Problem parameters

The parameters involved in this problem are:

ρ : Density

C :heat capacity

κ: thermal conductivity

v : velocity field

q: diffusive flux per unit fluid density.

T a: ambient temperature.

σ: Stefen Boltzmann constant

e: emissivity

h: convection coefficient

CDM Others relevand aspects

CDM Benchmarking

CDM Tutorials

CDM Contact people

CDM Akcnowledgements

Personal tools
Categories