Input Data

The current input data consist of one archive with .mdpa extension. The input file is free format and the reading is not depend to the spaces, tabs, endlines etc.

This format contains all ModelPart's data in a minimalistic block form and consists of 8 blocks of data in following form:

Begin ModelPartData
  //  VARIABLE_NAME value
End ModelPartData

Begin Table table_id variable1 variable2 
  // table_x table_y
End Table
 
Begin Properties  properties_id 
  //  VARIABLE_NAME value
End Properties
 
Begin Nodes
  // id	  X	Y	Z
End Nodes
 
Begin Elements element_name
  // id prop_id	 n1	n2	n3	...
End Elements
 
Begin Conditions condition_name 
  // id prop_id	 n1	n2	n3	...
End Conditions
 
Begin NodalData VARIABLE_NAME
  //  id is_fixed value
End NodalData
 
Begin ElementalData VARIABLE_NAME
  //  id value
End ElementalData
 
Begin ConditionalData VARIABLE_NAME
  //  id value
End ConditionalData 
 
Begin Mesh mesh_id   // mesh_id cannot be zero!
  Begin MeshNodes
    // node_id
  End MeshNodes
 
  Begin MeshElements
    // element_id
  End MeshElements
 
  Begin MeshConditions
    // condition_id
  End MeshConditions
End Mesh

Begin SubModelPart SubModelPartName
  Begin SubModelPartTables
    // Table_id
  End SubModelPartTables

  Begin SubModelPartNodes
    // node_id
  End SubModelPartNodes

  Begin SubModelPartElements
    // element_id
  End SubModelPartElements

  Begin SubModelPartConditions
    // condition_id
  End SubModelPartConditions

  Begin SubModelPart SubModelPartName // Note that this would be a sub sub modelpart
    Begin SubModelPartTables
      // Table_id
    End SubModelPartTables
  
    Begin SubModelPartNodes
      // node_id
    End SubModelPartNodes

    Begin SubModelPartElements
      // element_id
    End SubModelPartElements

    Begin SubModelPartConditions
      // condition_id
    End SubModelPartConditions
  End SubModelPart
End SubModelPart

Each block starts with a Begin statement following by the block name and ends with the End statement again following by the block name. Some block may have some additional parameter like id or variable in their definitions.

An example is presented in the following lines:

Begin ModelPartData
  //  VARIABLE_NAME value
  AMBIENT_TEMPERATURE 250.00
End ModelPartData
 
Begin Table 1 TEMPERATURE VISCOSITY
  200. 2e-6
  300. 3e-6
  400. 4e-6
End Table

Begin Properties 1
  DENSITY 3.4E-5  //scalar
  THICKNESS 19.5
  VOLUME_ACCELERATION [3] (0.00,0.00,9.8) //vector
  LOCAL_INERTIA [3,3] ((0, 0.27,0.27),(0.087,0,0.27),(0.075,0.23,0)) // matrix

  Begin Table TEMPERATURE VISCOSITY
    200. 2e-6
    300. 3e-6
    400. 4e-6
  End Table

End Properties

Begin Nodes
 1                  16                   0                   0
 2                  16                 0.4                   0
 3                15.6                   0                   0
 972                   0                 7.2                   0
 973                   0                 7.6                   0
 974                   0                   8                   0
End Nodes

Begin Elements Element2D3N
 1 1        1        2        3
 2 1        2        3        972
 3 1        3        972      973
 1796 1     972      973      974
End Elements
 
Begin Conditions Condition2D
 1    1        1          2
 1800 1        2          3
 1801 1        3          972
 1947 1        972        973
 1948 1        973        974
End Conditions


Begin NodalData DISPLACEMENT_X
 1 1 0.100000
 2 1 0.200000
 973 1 0.000000
 974 1 0.000000
End NodalData

Begin NodalData DISPLACEMENT_Y
 1 1 0.000000
 2 1 0.000000
 973 1 0.000973
 974 1 0.000974
End NodalData

Begin NodalData DISPLACEMENT_Z
 1 1 0.000000
 2 1 0.000000
 973 1 0.000000
 974 1 0.000000
End NodalData

Begin NodalData VISCOSITY
 1 0 0.010000
 2 0 0.010000
 973 0 0.010000
 974 0 0.010000
End NodalData

Begin SubModelPart Inlets
 Begin SubModelPartTables
  1
 End SubModelPartTables

 Begin SubModelPartNodes
  1
  2
 End SubModelPartNodes

 Begin SubModelPartElements
  1
 End SubModelPartElements

 Begin SubModelPartConditions
  1
  1800
 End SubModelPartConditions

 Begin SubModelPart Inlet1
  Begin SubModelPartNodes
   1
   3
  End SubModelPartNodes

  Begin SubModelPartConditions
   1
   1800
  End SubModelPartConditions

 End SubModelPart

 Begin SubModelPart Inlet2
  Begin SubModelPartConditions
   1800
   1801
  End SubModelPartConditions
 End SubModelPart

End SubModelPart

Begin SubModelPart Outlet
  Begin SubModelPartProperties
   1
  End SubModelPartProperties

 Begin SubModelPartConditions
  1948
 End SubModelPartConditions

End SubModelPart

The old format for data file is still supported due to the backward compatibility but without further improvement. The old format description can be found here